Citation recommendation based on citation tendency

Scientometrics - Due to the development of academic, more and more attentions are paid to citation recommendation. To solve the citation recommendation problem, researchers begin to focus on the...     

渣油催化临氢热转化钼铁双金属催化剂的研究

Replacement of precious single metal catalysts with cost-effective, highly-dispersed composite catalysts for catalytic hydrothermal conversion of residue holds tremendous promise for the residue upgrading technologies. Organic metals were added to the feed as the oil-soluble precursors, and transformed into the catalytic active phases in this work. Physical properties and structures of the composite catalysts had been investigated by X-ray fluorescence spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscope and transmission electron microscopy. The composite catalysts were found to be highly efficient in the catalytic hydrothermal conversion of both model compound and residue. Increased metal dispersion and synergistic effects of two metals played indispensable roles in such catalytic system. Results showed that under the test conditions in the article, the catalyst had the best catalytic performance when the mass ratio of molybdenum to iron was 1.5.     

Improved Corrosion Resistance of Selective Laser Melted Ti–5Cu Alloy Using Atomized Ti–5Cu Powder

The different types of metal powder used for selective laser melting(SLM) process would cause distinct corrosion behavior due to the uniformity of the obtained microstructure.The SLM-produced Ti–5Cu alloy using atomized Ti–5Cu metal powder(SLMed Ti–5Cu) in this work reveals a relatively uniform microstructure with overwhelming acicular α/α′ phase and shows great advantages on corrosion resistance compared with the SLM-produced Ti–5Cu alloy using the mixture powder(SLMedM Ti–5Cu).The effect of the micro-galvanic cells decreases due to the undetectable Ti_2Cu phase in the microstructure of the SLMed Ti–5Cu.An apparent passivation behavior was observed for SLMed Ti–5Cu instead of severe pitting phenomenon for the SLMed-M Ti–5Cu.The charge transfer resistance of SLMed Ti–5Cu in this work is 10.09 ± 2.63 MΩ cm~2, which is significantly higher than that of SLMed-M Ti–5Cu(4.76 MΩ cm~2).The above result indicates the atomized Ti–5Cu powder plays an important role in the formation of the uniform microstructure of SLMed product, thereby enhancing its corrosion resistance in Hank's solution at 37 ℃.     

以专业认证为抓手的化工专业人才培养模式研究与实践

为深入落实本科教育和人才培养的相关要求,实现高等教育内涵式发展,郑州大学化工专业以工程教育专业认证为抓手,践行以学生为中心的核心理念,以学生学习成果为导向,建立了“评价—反馈—改进”闭环和与用人单位协同持续改进的培养机制。教学过程中贯穿专业教育和课外教育,激发学生专业兴趣;坚持“以本为本”,培养卓越化工人才。教改在学生就业、竞赛、外部评价及专业建设等方面取得了较好的成效,提升了专业知名度及专业培养质量。     

Sparse non-convex Lp regularization for cone-beam X-ray luminescence computed tomography

Cone-beam X-ray luminescence computed tomography (CB-XLCT) is an attractive hybrid imaging modality, and it has the potential of monitoring the metabolic processes of nanophosphors-based drugs in vivo. However, the XLCT imaging suffers from a severe ill-posed problem. In this work, a sparse nonconvex L_p (0?p?L₁ regularization. Further, an iteratively reweighted split augmented lagrangian shrinkage algorithm (IRW_SALSA-L_p) was proposed to efficiently solve the non-convex L_p (0?p?p-values (1/16, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8) in both 3D digital mouse experiments and in vivo experiments. The results demonstrate that the proposed non-convex methods outperform L₂ and L₁ regularization in accurately recovering sparse targets in CB-XLCT. And among all the non-convex p-values, our L_p(1/4?p?相似文献   

气烟囱效应——礁滩相岩性气藏的典型地震响应特征

品质良好的地震剖面上出现的地震模糊带称为气烟囱，发现和识别气烟囱是寻找大型气藏的有效方法。四川盆地东北部长兴组气藏是礁滩相岩性气藏，礁、滩作为一个独立的岩性体，与周围的地层、岩性结构差异较大，由此在构造应力场中形成力学尖点，从而产生气烟囱效应。已知的黄龙场、普光等气田，其气烟囱普遍存在。点礁通常形成下方的气烟囱，台缘礁通常在上方形成气烟囱；礁滩相在构造运动中控制了断层的发育过程，凸起的礁滩相上方可能发育对冲断层；斜坡较陡的台缘礁可能发育叠置的逆冲断层；礁、滩两侧边缘的断层一般都比较发育。断层发育加强了气烟囱效应。模拟试验验证了地震剖面解释结果。根据气烟囱地震相特征，预测黑池梁存在一个大型气藏。     

辽中凹陷中深层储层主控因素研究

辽中凹陷沙河街组及部分东营组储层埋藏深度大及储层物性变化大的特点制约了中深层油气的勘探；通过分析沉积相、储层组成特点、成岩作用、异常高压、油气充注等对储层物性的控制．提出了中深层存在次生孔隙发育带，其形成主要源于岩屑长石砂岩中长石、碳酸盐岩胶结物、岩屑的溶蚀以及超压和早期油气充注对储层的保护。